An AFCI (Arc Fault Circuit Interrupter) is built for protection from fires that are imposed by arcing faults. Talking about arcing fault, This condition only happens when wires/cords are not in good condition, which is often caused when wire insulation is punctured either by hanging pictures or cable staples, cords that are stuck under household items, furniture that is pressed up onto plugs, natural aging of products, and exposure of cord to heat vents & sunlight. 

Knob-and-tube wiring was one of the most premier electrical wiring method in buildings across North America from about 1880 to 1950. The method was totally outdated and has the potential to be a safety hazard if not handled correctly. InterNACHI inspectors should ensure that they disclose knob-an2d-tube wirings while doing inspection. The ESA suggests employing a Licensed Electrical Contractor in GTA if you’ve got knob & tube wiring and tell him to check the health for the same. Also, you can ask for a home electrical system assessment on alternate for making sure you are safe. 

Stab-Lok panels are much dangerous as they do not function like circuit breakers in a proper manner. Circuit breakers are basically utilize to stop electrical damage from being inflicted by interrupting the flow of electrical current in case of faults. Stab-Lok panels have a high rate of failure and can show failure ratio of 1:3 in terms of short circuits or overload circuits. Since these don’t work properly, and damage can be done easily, we recommend changing it to service panel for best safety among all electrical appliances.

Yes, LED bulbs are up to 90% more efficient.

Yes. You should never ignore a circuit breaker that continue to trip over again. This symptom is a common sign of overload circuits and can lead to electrical fire. To fix this problem, we suggest you to replace your electrical panel as of the changing nature of electrical circuits in new houses as compared to old ones or you can opt for an extensive rewiring of the whole home with new circuit and circuit breaker. 

Yes, you can but you have to make sure that the electrical box is correctly braced and prepared as per the weight of fan you are looking to acquire. We recommended that you hire a team of electrical contractors in GTA to do so. 

No. Aluminum wiring is safe as long as it’s connected without any damage to the wire. The Ontario ESA code allows aluminum wiring installation & recommends using copper pig tailing if needed.

It’s hard to find the immediate fault spot by a homeowner associated with electrical appliances. Any handymen can definitely tell you they can resolve the issue but in fact, they are not qualified to do so. Professional Electricans in GTA have to go years of training, certifications and efforts to obtain a license, that can offer you safety for life.

At Moon Tech Electric, We strongly advise you making any electrical repairs a DIY project for a list of reasons: You Risk Getting Shocked Your home dwells hundred volt of electricity. Without knowing how to test it for electrical currents, your risk of getting electrocuted is high resulting into life long injuries. To tackle that, you need an electrician or a team of licensed electrical contractors in GTA to handle the repair or replacement without costing you an arm or leg. You Could Start a Fire It only take one spark to become an electrical fire. If you have exposed wires or wires with overheating issues, you definitely need an electrical contractor to handle it properly. Youtube can help, but not in the cases of electrical work. You need a skilled electrician to assess your electrical system that can help you to make a better choice safe for you and your family. You May need a Permit All electrical work in GTA, Ontario requires you to obtain a permit. If you dont have an electrical contractor license, there’s no green flag that you can perform a job by yourself and can lead to hefty fines and even jail times.  Get everything electrical done with Moon Tech Electric  Whether you are a pro or not, you need an electrical professional that can handle the tough work around your place and ensure that your family remains safe. Call our team of electrical contractors in GTA today – Moon Tech Electric. 

Licensed Electrical Contractors in GTA, Ontario are the only businesses with certain impunity and are legally authorized to do electrical work. All Licensed Electrical Contractors:  carry liability insurance  have Workplace Safety and Insurance Board coverage understand that they must arrange for an electrical notification to ESA are qualified to perform electrical work to meet the Ontario Electrical Safety Code can show an ECRA/ESA licence number. Always ask for an ECRA/ESA licence number to make sure you’re choosing a certified electrical contractor in GTA. Check the status of the person working in your home or find a Licensed Electrical Contractor in GTA at. https://findacontractor.esasafe.com/